CAME BK-2200 Sliding Gate Motor

CAME BK-2200 Sliding Gate Kit

Complete 230V AC automation device for sliding gates weighing up to 2200kg, and with MODULE 6 pinion.

Total automation flexibility for multi-user access ways. BK is the ideal solution when automating condominium and industrial facility access ways.

Features:

- Designed to withstand anything – sturdy with carefully chosen materials to with stand heavy-duty use.

- Total auto-control – prior to opening or closing the gate, the built-in electronics test the proper functioning of all the safety devices hooked up to the system.

- Easier and safer operations – BK can be connected to and control any auxiliary lighting, which turns on each time the gate opens, making it easier and safer to drive in and out.

- Extra safety – the integrated mounting and adjustment system for the gear motor is located inside the automation device. This makes it even safer when floor mounting. The control electronics are also built into the unit so it is protected from the environment.

- Partial Opening –for pedestrian access

- BK three-phase motor technology enables the motor to reach its full potential

- Increased thrust – the 230V three phase electronics provides additional dynamic traction during initial stages of the opening and closing phases.

- Frequent accesses and Inertia Control – generated passive inertia from the mass of the gates are controlled by the control panel, making access safer as well as functioning even under severe conditions.

Technical Specifications

Maximum Gate weight 2200kg
Maximum Gate length 20.0m
Protection Rating IP54
Control board powersupply 230V AC 50/60Hz
Motor powersupply 230V AC 50/60Hz
Absorbed input 5.1A
Power 580W
Speed 10.5 m/min
Duty cycle 30%
Traction force 1500N
Operating temp. -20°C min / 55°C max