MD360C – 433MHz Wireless Magnetic Field Vehicle Detector Controller

MD360C – 433MHz Wireless Magnetic Field Vehicle Detector Controller

MD360C – 433MHz Wireless Magnetic Field Vehicle Detector Controller

Roll over* Roll over the image to zoom in


Loading Updating cart...

The MD360 series has been designed for parking and access control applications and is a cost-effective wireless solution for detecting vehicles to facilitate the automatic opening of security gates.

The MD360C (Controller) is a wireless control unit which enables configuration and output of the MD360 Series wireless vehicle detectors. The controller features DIP switches for easy configuration and LED’s for visual indication of the operation of the paired Wireless Detector. A relay output switches ON when a vehicle is detected.


Wireless Connectivity

  • Up to 50 metres range (Line of sight).
  • ETSI EN300-220 Compliant.

Battery Life (MD360 detectors only)

  • Up to 5 years battery life @ 25? (Calculated @ 1 detect per minute).

Reset Switch

  • Reset the Wireless Detector from the Controller (Detector adjusts to the environment becoming ready
    for vehicle detection).
  • Easily pair MD360 Detector to Controller (Note: Only one detector can be paired to a controller at one

Switch Selectable Sensitivity

  • Two sensitivity settings are available on the switches to allow for flexibility in

Filter Option

  • Prevent false detection of small or fast-moving objects.

Relay Mode

  • Configure the relay to operate in presence or pulse mode.

Pulse Relay Selection

  • Configure relay to pulse on vehicle detect or undetect.

Motion Filter

  • Only trigger output once the vehicle has stopped moving for at least 1 second.

Presence Settings

  • Wireless detector will reset after selected timeout: 5min, 30min, 2hr and no-timeout.

Technical Specifications – MD360C (Controller)

Power supply 12 - 24VAC/DC 50/60Hz 45mA
Radio Specifications Frequency: 433.92 MHz

Power: 10 dBm

Modulation: 2FSK

Bandwidth: 250 kHz

Antenna: 1.8 dB Dipole Antenna (Supplied with controller)

Presence/Pulse Relay Change over contact 0.5A/220VAC
Response time Approximately 1s after vehicle enters Puck area.
Indicators LED indicators show: Power, Detect and Reset State.
Connector 5 Way Screw terminal block.
Dimensions 105mm X 90mm X 22mm
Operating Temperature -20°C to +70°C
Storage Temperature -40°C to +85°C