The MD360 series has been designed for parking and access control applications and is a cost-effective wireless solution for detecting vehicles to facilitate the automatic opening of security gates.

The MD360 Series Wireless Vehicle Detectors Combine magneto resistive sensor technology with a low power battery operated radio transceiver. This combination results in a self-contained wireless vehicle detector that does not require a loop or any cables to be run to it making installation times quicker.

The wireless detectors sensor detects changes in the earth’s magnetic field due to the presence of a vehicle, which results in a detect signal being output to the MD360 Controller.

The MD360P ‘Puck’ has been designed to be buried in the road surface underneath the vehicle path. It is suitable for installation in any stable surface (bitumen, concrete, compacted earth etc.) and can be easily installed into a 70mm core drilled hole.

Features

Wireless Connectivity

• Up to 50 metres range (Line of sight).
• ETSI EN300-220 Compliant.

Battery Life (MD360 detectors only)

• Up to 5 years battery life @ 25? (Calculated @ 1 detect per minute).

Reset Switch

• Reset the Wireless Detector from the Controller (Detector adjusts to the environment becoming ready
  for vehicle detection).
• Easily pair MD360 Detector to Controller (Note: Only one detector can be paired to a controller at one
  time).

Switch Selectable Sensitivity

• Two sensitivity settings are available on the switches to allow for flexibility in
  configuration.

Filter Option

• Prevent false detection of small or fast-moving objects.

Relay Mode

• Configure the relay to operate in presence or pulse mode.

Pulse Relay Selection

• Configure relay to pulse on vehicle detect or undetect.

Motion Filter

• Only trigger output once the vehicle has stopped moving for at least 1 second.

Presence Settings

• Wireless detector will reset after selected timeout: 5min, 30min, 2hr and no-timeout.

Technical Specifications – MD360 Wireless Vehicle Detectors

Manual