Shop By Category
Refine By:
Price:
Brand
Nice Run 1800 Sliding Gate Opener Kit
Nice RUN 1800
For sliding gates weighing up to 1800 kg. Electromechanical gear motor with Nice BlueBUS technology.
Features & Benefits:
- User-friendly: the Nice BlueBUS technology, enables to power and control a maximum of seven couples of photocells from the MoonBus series using two wires only.
- Practical: the control unit and PS524 battery charger (to which two B12-B batteries should be added) can be connected by means of a simple connector and can be housed directly inside the motor.
- Advanced: the temperature sensor adapts the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
- Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a ?ashing light. 8 programming levels.
- Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.
- Sturdy: base and release in pressure die cast with easy to open handle.
- Very quiet: gear motor on bearings.
Kit Contains:
- RUN1800 - 1x Irreversible 24Vdc, with incorporated control unit, with electromechanical limit switch, for gates up to 1200kg
- FLOR2R-S - 2x transmitter 433.92Mhz, 2 channels
- 4.0m Nylon Steel-reinforced gear rack
- Additional Nylon Steel-reinforced Gear Rack 1.0m can be purchased here.
Optional Accessories
- Wi-Fi
- Keypad
Technical Specifications
Code |
RUN1200 |
Electrical data | |
Power supply (Vac 50 Hz) |
230 |
Absorption (A) |
3 |
Power (W) |
700 |
Built-in capacitor (?F) |
- |
Performance data | |
Speed (m/s) |
0.17 |
Force (N) |
1100 |
Work cycle (cycles/hour) |
42 |
Dimensional and general data | |
Protection level (IP) |
44 |
Working temp. ( °C Min/Max) |
-20 ÷ +50 |
Dimensions (mm) |
400x255x390 h |
Weight (kg) |
24.5 |