Shop By Category
Price:
Brand
ATA GDO-10v3 Toro Commercial Rolling Door Opener
ATA GDO-10v3 Toro Commercial Rolling Door Opener
The Toro offers sophisticated commercial roller door opening technology and superior pulling power. With built-in Battery Back-up and a wall-mounted control panel you can program a variety of operating modes for your security and safety.
A marriage of immense power and sophisticated logic controls, the Toro can cater for roll-up doors up to 28m2 and high duty cycles.
The logic control system, with LCD screen, can manage up to 511 TrioCode™ Garage Door Remotes, and offers time clock controlled access programs, adjustable speed and obstruction settings. A full complement of controlling inputs and outputs are standard, including compatibility with up to three Wireless Safety Beams systems simultaneously. Rounding this out is Soft Start/Soft Stop, Door Profiling, Intelligent Safety System and variable Auto Close settings.
Features:
- ISS (Intelligent Safety System-Smart Protection)
- Soft/Start Soft/Stop
- Gate/Door Profiling
- DC Motor
- Auto Close Mode
- Ventilation Mode
- Vacation Mode
- Auxiliary Output
- Service Reminder
- Battery Backup
- Time Clock
Technical Specifications:
Standby power | 2.6 Watts |
Geared Motor power | 150 Watts |
Motor type | 24Vd.c. Permanent Magnet |
Maximum door opening: Height: Width: Weight: |
5100mm |
Opener Limits Travel | 5.5 turns of Door Drum Wheel |
Maximum Rated Load | 500N |
Nominal Load | 150N |
Duty Cycle | 25 Operations/hr |
Receiver type | UHF Multi-frequency FM Receiver |
Receiver code storage capacity | 511 X 4 button Transmitter Codes |
Receiver Sensitivity | - 103 dB |
Transmitter frequency | UHF Multi-frequency FM Transmitter |
Number of code combinations | Over 100 billion random codes |
Code generation | Non-linear encryption algorithm |
Controller fuse | 10 A slow blow |
Transmitter Battery | CR - 2032 (3 Volts) |
Real Time Clock Battery | CR -1220 (1.5 Volts) |
Backup Battery | 12 Volts 6 Amp Hr x 2 |
Notes:
- The door must be well balanced. A person should be able to lift the door up manually with very little
effort in case of an emergency.
- Intermittent operations may occur in areas which experience very strong winds. Strong wind puts extra
pressure on the door and tracks which may in turn trigger the safety obstruction detection system
intermittently.
- If the Safety Beam are not installed then the controller will automatically goes into “Safety Close“
mode. Limited number of features are available in this mode please refer to Section 13.1.