Shop By Category
Refine By:
Price:
Brand
CAME SDN6 Slide Gate Motor Kit
CAME SDN6 Slide Gate Kit
For gates weighing up to 600kg and 18.0m in length.
Complete automation system with 24V DC motor for sliding gates weighing up to 600kg. Its modern design and motor make it a complete system for sliding residential gates. This product gives reliability and durability. The ideal solution for residential and light commercial installations
Features
- Encoder Movement Control - - Through the ENCODER, the dedicated panel constantly controls the gate leaves’ movement allowing for safe thrust.
- ZN7 Control Board
- Opening and Closing Slowdown – for a smooth and soft closing
- Partial Opening – to allow pedestrian access
- Total control of the gate from the transmitter including the possibility of immediately stopping the movement of the gate leaves
- Obstacle detection – a special electronic circuit constantly sweeps for any obstacles the gate leaves, and if needed stops or inverts the direction of movement.
- Designed to last over time – the high degree of sturdiness of all the components provides maximum endurance against atmospheric agents.
Kit Contents:
- 1x SDN6 270W Motor
- 1x Plug-in Radio Receiver
- 2x 2Button Remotes
- 1x Tuned Antenna
- 4x 1.0metre Nylon Steel-reinforced gear rack
- Additional Nylon Steel-reinforced Gear Rack 1.0m can be purchased here.
Optional Accessories
- Keypad
Technical Features:
Type | SDN6 |
Protection rating | IP44 |
Power supply | 110/230V AC 50/60Hz |
Motor power supply | 24V DC |
Maximum Gate Weight | 600kg |
Maximum Gate length | 18.0m |
Operating temparature | -20 ÷ +55°C |
Max power | 270W |
Duty cycle | Heavy Duty Service |
Speed | 200mm/sec |
Weight | 10.5Kg |