Nice Robus 600

For sliding gates weighing up to 600 kg. Electromechanical gear motor with Nice BlueBUS technology. Versions with electromechanical limit switch (RB600) 

Features & Benefits:

Compatible for operation with Solemyo and Opera systems.

• User-friendly: the Nice BlueBUS technology, enables to power and control a maximum of seven couples of photocells from the MoonBus series using two wires only.
• Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor.
• Advanced: RB600 is equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
• Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a ?ashing light. 8 programming levels.
• Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.
• Sturdy: base and release in pressure die cast with easy to open handle.
• Very quiet: gear motor on bearings.

Kit Contains:

• RB600 - 1 irreversible electromechanical gear motor, with incorporated control unit and OXI plug-in receiver which can beused for connections via Nice Blue BUS
• FLOR2R-S - 2x transmitter 433.92Mhz, 2 channel
• 4.0m Nylon Steel-reinforced gear rack
• Additional Nylon Steel-reinforced Gear Rack 1.0m can be purchased here.

Optional Accessories

- Photocell

- Wi-Fi

- Keypad

- Solar Power Kit

Technical Specifications