For sliding gates weighing up to 600kg (Robus 600) and up to 1000 kg (Robus 1000). Electromechanical gear motor with Nice BlueBUS technology. Electromechanical limit switch.

Compatible for operation with Solemyo and Opera systems.

User-friendly: The Nice BlueBUS technology, enables to power and control a maximum of seven sets of photocells, from the MoonBus series, using two wires only.

Practical: The control unit and backup battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor.

Advanced: Equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.

Intelligent: Thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.

Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing manoeuvre.

Sturdy: base and release in pressure die cast with easy to open handle.

Very quiet: gear motor on bearings.

Easy and quick installations, just two wires without polarity! With Nice’s revolutionary BlueBUS system far fewer connections are required, which means incredible time savings: just two wires, which carry both the communication signals and the power supply! With BlueBUS you don’t need to observe any polarity, therefore any related risk factor is eliminated.

Photocells, safety devices, control keys, signalling lights etc. can be connected to BlueBUS. The ROBUS control unit recognizes all the connected devices individually through a suitable recognition process, and can detect all the possible abnormalities with absolute precision.